Vision Condo Inspections Include:

 

1 The units Structure Integrity is fully inspected for any structural deficiencies.

2 The Heating and Cooling system is thoroughly tested and inspected:

The heating and cooling system is tested for Proper temperature drop on the cooling side

Proper temperature rise on the heating side

Proper amperage draw on the compressor and the heating strips when in operation.

All supply drops inside the home are temperature tested. (most companies only check temperatures at one location, no other company inspects the AC system this thorough.)

3 The Electrical system is thoroughly tested and inspected:

The panel cover is removed all wires are checked for proper size (gauge) on the proper size breakers

A THERMO INFERRED HEAT SCAN is done on the panel (for any possible hot spots that would indicate loose connections)

AMPERAGE and voltage readings are taken on several of the different systems (ie, hot water heater, AC system, appliances, ect) to make sure of proper operation

All accessible electrical devices, outlets and fixtures are tested for proper operation

4 All the Appliances (dishwasher, disposal, stove, microwave, refrigerator, washer and dryers) are tested and run through FULL cycles to make sure of proper operation. (many companies short cycle the appliance)

5 All the plumbing PIPES, fixtures, hot water heater and drains are checked for proper operation.

6 The Tub and Shower tile surrounds are looked at very closely for loose tiles and deteriorated sub walls.

7 All interior and exterior Doors are checked for proper operation.

8 All interior Flooring is checked. Walls and ceilings are inspected. ( Any Defective Drywall Is Noted)

9 Fireplace systems are inspected.

10 All Windows and screens are checked for proper operation (single hung, sliders, awnings, ect)

11 The Garage and garage overhead door / openers are checked for proper operation.

12 Patio / Porch areas are inspected.

13 All patio deck and Screen Room areas are inspected.

14 Boat Lifts / Docks are inspected for proper operation & installation.

15 Full digital photos are taken throughout the inspection and incorporated into the inspection report.

16 Wind Mitigation and 4 Point Inspections ( often required by insurance companies ) can save you hundreds of dollars on your insurance. additional charge

17 Mold testing and Radon testing, can all be done as well at an additional charge.